non woven geotextile

long fiber geotextile PET long fiber spunbond needle punched nonwoven geotextile

long fiber geotextilePET long fiber spunbond needle punched nonwoven geotextile

No.1:

PET continuous filament spunbond needle punched nonwoven geotextilegeotextile Technical Specification(representative average data.)
Test Item/Unit/No.			HY100	HY150	HY200	HY250	HY300	Test Method
Mechanical Properties
Tensile Strength	CD	kn/m	4.8	8.3	10.9	14.5	18	ASTM D 4595
	MD		7	12	14	18	22
Elongation at maximum load	CD	%	65	64	63	62	61
	MD		64	63	62	61	60
Grab Strength	CD	kn ≥	0.36	0.58	0.87	1.08	1.35	ASTM D 4632
	MD		0.42	0.78	1.07	1.33	1.6
Grab Elongation	CD	%	55	55	59	59	60
	MD		50	50	51	51	53
Trapezoidal Tear	CD	kn ≥	0.16	0.23	0.31	0.39	0.46	ASTM D 4533
	MD		0.245	0.31	0.42	0.46	0.55
Burst Strength-CBR plunger method		kn ≥	0.85	1.47	2.3	2.8	3.3	ASTM D 6241
Puncture resistance		n ≥	220	320	430	540	650	ASTM D 4833
Mullen Burst		Mpa	1.2	1.8	2.3	2.8	3.3	ASTM D 3786
Cone drop resistance(hole-Φ)Dynamic perforation diameter		mm	34	30	26	22	19	BS EN 918-1996
Hydraulic Properties
Flow Rate,Q100		L/s/m²	200	210	180	150	140	ASTM D 4491
Permeability		cm/s	0.48	0.43	0.39	0.36	0.34
Apparent Opening Size O95		mm ≤	0.13	0.12	0.12	0.11	0.11	ASTM D 4751
Apparent Opening Size O90		mm ≤	0.12	0.11	0.11	0.1	0.1
Physical Identification Properties
Thickness 2KPa		mm	1.1	1.3	1.8	2.5	2.9	ASTM D 5199
Mass per unit area		g/m²	100	150	200	250	300	ASTM D 5261
Width		m	2/3/6/	2/3/6/	2/3/6/	2/3/6/	2/3/6/

 NO.2:Singeing geotextilePET continuous filament spunbond needle punched nonwoven geotextile

1.Characteristic : with high intensity and powerful ant corrosiveness, great friction factor, low percentage elongation, good performance in heat resistance and permeability.2.Use:prevent the water from encroaching on the structure layer in the projects. This kind of geotextile is paved between asphalt layer and grave layer, after filled with glue oil, depending on its high tensile strength, it can act as waterproof layer and prevent reflex crevice.3.Application :road surface projects of high-grade highway and municipal road.4. Specification 

Item	Unit	Standard	Index
Unit area tolerance	g/m2	GB/T13762-1992	160	180	200
Thickness	mm	GB/T13761-1992	1.40	1.50	1.60
Tensile strengthMD/CD	KN/m>	GB/T3923.1-1997	8.00	9.00	10.00
ElongationMD/CD	%	GB/T3923.1-1997	40~70
Trapezoid tear strengthMD/CD	KN>	GB/T13763-1992	0.23	0.26	0.28
CBR puncture strength	KN>	GB/T14800-1993	1.50	1.70	1.80
Loading strength	mm	JTJ/T019-98	20	23	25
Hole size	mm	GB/T17634-1998	0.070.20
Vertical permeability	cm/s	GB/T15789-1995	k× (10-1 10-3), K=19.9
Width	m	GB/T4667-1995	5.1	5.1	5.1

non woven geotextile